User Manual of Tronsmart OpenFly Clip

Tronsmart OpenFly Clip

User Manual

Open Ear Clip-on Earbuds

Model: S1010

- 2 -

Package Contents

Product Overview

• 1 x Tronsmart OpenFly Clip Open Ear Clip-on Wireless Earbuds(L/R)

• 1 x Charging Case

• 1 x USB-C Charging Cable

• 1 x Quick Start Guide

• 1 x Warranty Card

Thank you for purchasing the Tronsmart OpenFly Clip Open Ear Clip-on Earbuds.

Please read the user manual before use and keep it handy for future reference.

If you have any additional questions or comments, please contact us by email at:

support@tronsmart.com.

1Microphone 2Sound Outlet

3Charging Case 4Indicator of Charging Case

5USB-C Charging Port 6Tap Control

7Charging Contacts 8Reset Button on Charging

Case

- 3 -

3Wearing

For a perfect t, place the earbuds on the thinnest part of your outer ear.

Gently adjust them until you achieve a secure seal and optimal sound.

4Turn On/Turn O

Remove the protective lms on the charging case before rst use. Put both

earbuds into charging case and close it to charge.

- 4 -

EN 5Pairing

Open the charging case. The earbuds will automatically turn on and enter

pairing mode. Search and click ‘Tronsmart OpenFly Clip’ to connect with your

device.

With Charging Case:

Turn On

Open the charging case

Turn O

Close the charging case

Tronsmart OpenFly Clip

- 5 -

Note:

If you need to connect with another device, please follow the steps:

a. Disconnect the pairing device and the earbuds will automatically enter

pairing mode.

b. Put both earbuds into charging case with case opened, press the button on

the charging case for 5s with indicator ashes white and the earbuds will

enter pairing mode. If connected successfully, the indicator of charging case

will o.

6Dual Audio Modes

a. Search & click ‘Tronsmart OpenFly Clip’ to connect with device A.

b. Disconnect ‘Tronsmart OpenFly Clip’ from the device A (Note that do not

clear the pairing record on the device).

Device A

Tronsmart OpenFly Clip

Device A

Tronsmart OpenFly Clip

- 6 -

c. Tronsmart OpenFly Clip will re-enter pairing mode.

d. Search & click ‘Tronsmart OpenFly Clip’ to connect with the device B.

e. Click ‘Tronsmart OpenFly Clip’ on device A to connect.

Device B

Device A

Tronsmart OpenFly Clip

- 7 -

7Operation

Play/Pause Double Tap on the Left/Right earbud

Activate Voice

Assistant Triple Tap on the Left earbud

Next Track Triple Tap on the Right earbud

Volume +

(music-playing) Press and hold on the Right earbud

Volume -

(music-playing) Press and hold on the Left earbud

Answer a Call Double Tap on the Left/Right earbud

End a Call Double Tap on the Left/Right earbud

Reject an Incoming

Call Press and hold on the Left/Right earbud for 2s

Tap Control

- 8 -

8Indicator of Charging Case

a. Open the charging case or press the button on the charging case to check

the battery levels.

＜10% Indicator Stays Orange for 3s

＞10% Indicator Stays Green for 5s

Put both earbuds into the charging case and

close the lid to begin charging. The indicator

light will turn o after fully-charged.

b. Charging Status of Earbuds

- 9 -

9Charging

a. Put both earbuds into charging case and close it.

Charging Time of Earbuds: ≤1H

b. Connect the charging case to a power supply using the attached USB-C

charging cable. The indicators will ash while charging and stay on if fully

charged.

Charging Time of Charging Case: ≤2H

1 Hour

2 Hours

- 10 -

11 Specications

*Specications may change without prior notice.

Model S1010

Rated Output Power ≤10mW

Input 5V 0.5A

Driver Unit 11mm

Battery Capacity Charging Case: 350mAh

Earbuds: 40mAhx2

Playtime 6H Max

Frequency Range 20Hz–20kHz

Wireless Version 6.0

Frequency Band 2.402GHz-2.480GHz

Maximum Transmission

Power ＜10dBm

Transmission Distance Over 10m/33ft (Open Area)

10 Reset

Place both earbuds in the charging case with case opened and press the button

on the case for 5s until the orange indicator blinks 5s and green indicator ash

3 times. It will clear the pairing records between the earbuds and your device.

After a few seconds, the earbuds will enter pairing mode automatically.

Note:

After resetting, make sure to delete the pairing record of any connected

Bluetooth devices so that they can be easily searched for pairing again.

- 11 -

Warranty Information

Your ‘Tronsmart OpenFly Clip Open Ear Clip-on Earbuds’, is warranted to

the original owner for 1 year from the date of purchase against defects in

material and workmanship under normal use and service. Tronsmart is not

responsible for the accidental use of this product and its liability will not

exceed the purchase price of the product. If you have any problems while using

the product, please do not hesitate to contact our customer support team at

support@tronsmart.com.

Care and Maintenance

• If this product is not used for a long period of time, it's recommended to recharge

it at least once a month to extend its life and maintain the normal use.

• Keep the product in a dry location.

• Do not dispose this product in re as batteries may explode or leak.

• To clean the product, use a lightly dampened cloth in water to clean the exterior

in-case it gets dirty.

• Do not disassemble this product. It contains no user serviceable parts.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause

undesired operation.

NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which

the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Changes or modications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

RFwarningforPortabledevice

ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.The

devicecanbeused

inportableexposureconditionwithoutrestriction.

Hearing Safety

To avoid hearing damage, do not listen for extended periods at high volume.

Do not turn the volume so high that you're unable to hear your surroundings.

Do not use earphones while driving. You should use caution or temporarily

discontinue use in potentially hazardous situations.

The product generates stronger permanent magnetic elds that could cause

interference with cardiac pacemakers, implanted debrillators(lCDs), and other

implants. Always maintain a distance of at least 3.94"/10 cm between the product

component containing the magnet (earbuds and charging case)and the cardiac

pacemaker, implanted debrillator, or other implant.

This symbol means the product must not be discarded as household waste,

and should be delivered to an appropriate collection facility for recycling. Follow

local rules and never dispose of the product and rechargeable batteries with

normal household waste. Correct disposal of old products and rechargeable

batteries helps prevent negative consequences for the environment and human

health.

To preserve natural resources, please recycle or dispose of the battery properly.

Consult your local waste authority for information regarding available recycling

and/or disposal options. When the battery runs out, remove the battery from

the product housing and cover the battery pack connections with heavy-duty

adhesive tape to prevent short circuit and energy discharge. Do not attempt to

open or remove any of the components.

Important Safety Instructions

• Do not disassemble.

• Keep out of the reach of children. The product contains small parts that may

be a choking hazard.

• The battery shall not be exposed to excessive heat such as sunshine, re, or

the like.

• Do not use the product in environments with too high or too low temperatures,

and never

• expose it to strong sunlight or very wet environments.

• Ensure there is no liquid, sweat or water on the charging port when charging.

• Refer to your user manual for your earphones waterproof level and follow the

corresponding instructions.

• For IPX4: Do not expose headphones to dripping or splashing water.

• For IPX4, IPX5, and lPX6: Do not submerge headphones in water.